Differences

This shows you the differences between two versions of the page.

--- quickstart:quickstart_guide [2009/03/12 12:58] – created camille
+++ quickstart:start [2009/03/12 15:01] – camille
@@ Line 7: / Line 7: @@
   * Launch the application and follow the initial setup instructions
-===== Configuring the inputs =====
+===== Input Setup =====
 When launched OSCulator shows an empty window.
 It is actually listening for incoming messages.
-As soon it receives OSC data, you can use it to send it to another application (see [[#Configuring the outputs|that section]]).
+As soon it receives OSC data, you can use it to send it to another application (see [[#Output Setup|that section]]).
-==== Connecting a Wiimote ====
+==== Wiimote ====
   - Plug any extension you want to use with your Wiimote and press buttons 1 & 2 of your Wiimote
   - A list of messages should appear in the main window
-  - Proceed to [[#Configuring the outputs|configuring the outputs]]
+  - Proceed to [[#Output Setup|configuring the outputs]]
-==== Connecting an iPhone / iPod Touch ====
+==== iPhone / iPod Touch ====
-  - Download an OSC compatible application on the App Store like:
+  - Unless you have it already, download an OSC compatible application on the App Store like:
     * [[http://hexler.net/touchosc|TouchOSC]]
     * [[http://lux.vu/blog/oscemote/|OSCemote]]
     * [[http://poly.share.dj/wiki/index.php/Mrmr|mrmr]]
-  - Connect your iPhone to the same local network as the computer that is running OSCulator
+  - Connect your iPhone to the same network as the computer that is running OSCulator
-  - Configure the aforementioned application so it sends OSC messages to that computer (you can follow [[tutorial:TouchOSCAndLive|that tutorial]] that has been written for TouchOSC, other applications work about the same)
+  - Configure the aforementioned application so it sends OSC messages to that computer (you can follow [[tutorial:1:|that tutorial]] that has been written for TouchOSC, other applications work about the same)
   - Touch some controls on the application running of the iPhone to test if the messages are well received by OSCulatorn they should appear in the list
-  - Proceed to [[#Configuring the outputs|configuring the outputs]]
+  - Proceed to [[#Output Setup|configuring the outputs]]
-===== Configuring the outputs =====
+==== Logitech SpaceNavigator ====
+  - Connect the SpaceNavigator to an USB port
+  - Click on the menu item Window -> Use SpaceNavigator
+  - Rock and roll
+==== OSC enabled software or device like the Lemur ====
+  * Any OSC enabled software or device can natively send data to OSCulator.  All you have to do is to make sure that the OSC output port of your device matches the OSC input port of OSCulator.
+  * Software based on the TUIO protocol will work out of the box too, though it might be easier for you to use the OSC input port ''3333''.
+  * The [[http://www.jazzmutant.com/|JazzMutant Lemur]] is usually sending its data on port ''8000''.
+  * To know the IP address of your computer, open the Network Utility application ((located in /Applications/Utilities)) and look for the IP Address.
+    * if your computer is connect with Airport, change the drop down menu to ''Network Interface (en1)''
+    * if your computer is connect with Ethernet, change the drop down menu to ''Network Interface (en0)''
+===== Output Setup =====
 Now that you have a working input, you can transform the incoming data to something useful.