PDA

View Full Version : Osculator and Torq



santi2091
09-10-2010, 07:45 AM
I finally got my iPad to connect to my Mac by manually inputting the host name, etc. Now i made my own template for torq and the xponent (which i unfortunately have to work with until i can upgrade in november to the traktor S4). I got most of the things to respond except the pitchbend sliders. I looked at the xponent manual and for the left and right pitchbend sliders, it says that the MIDI Channels, respectively, correspond to 1 and 2. Then the MIDI Note/CC is blank. I dont know how to address that in osculator so that torq will recognize it. I have the Event Type as MIDI CC, the Values are blank, and the Channels are 1 and 2 respectively. Can someone please help me on this. I would also like to know if it is possible to add the xy pad that the xponent has. thanks for the help

camille
09-10-2010, 11:54 AM
Hi Santi,


From what I can see in the manual, it says that it is a Pitch Bend message on channel 1 or 2 (left / right).


So, in order to send Pitch Bend messages :

- in Event Type, select MIDI Note

- in the Value column, select Pitch Bend

- adjust the last column for the channel number.


Best,

Cam