Announcement

Collapse
No announcement yet.

OSCulator, BCF2000 and CueMix, laggy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • OSCulator, BCF2000 and CueMix, laggy

    Use OSCculator to connect the BCF2000 to CueMix, it all works very well, sometimes after a bit of idle time, if I use the BCF2000, the CueMix does not respond immediately, it takes 40 50 seconds, then resume.

    I disabled app-nap on oscculator, but the problem persists, there is nothing else to do?

    BCF2000: https://www.music-group.com/Categori...CF2000/p/P0246
    motu cuemixer: http://motu.com/products/motuaudio/t...-overview.html
    other resource: https://www.pongasoft.com/blog/yan/m...ume-with-MIDI/

  • #2
    Hi morpe,

    OSCulator does not opts-out from app-nap, so you shouldn't need to disable it.

    What you describe here sounds like a network issue.
    Here are a few questions (in bold) to help you troubleshoot:

    First you need to see where the problem is happening. It could be OSCulator, but it could be CueMix as well. I rule out the BFC2000 as it is USB/MIDI and I don't believe there is any problem on this side. Have you had a look at OSCulator message activity (in the message monitor)? Does OSCulator responds at once?

    It is possible that you have a DNS related problem where localhost takes long time to resolve. Is your computer connected to Internet and how? Could you try to disconnect it to see it that helps? How is your OSC target configured? Do you use "localhost" to route messages to CueMix? You could try replacing localhost with 127.0.0.1 and see if that helps.

    Good luck.

    Best,
    Cam

    Comment


    • #3
      changed port and ip, solves!
      ps: VLC uses port 8000

      tnx!

      Comment


      • #4
        hello, I still lag problems, it sometimes seems as pause, it happens randomly.
        The CueMix points to 192.168.1.2:8888, I tried 127.0.0.1 but it works only in one direction (CueMix -> BCF2000), is a bit 'strange

        tnx!
        Last edited by morpe; 01-18-2017, 04:31 PM.

        Comment

        Working...
        X