Tweet
Trouble Receiving Messages from Open Stage Control
Hi, apologies as I'm fairly new to OSCulator.
I'm trying to use Open Stage Control to send either OSC or MIDI messages to OSCulator in order to trigger some keystrokes. While Open Stage Control is quite confusing, I've managed to configure things such that messages are being received by OSCulator. The problem is that I'm unable to reliably get OSCulator to trigger the key commands once the messages are received.
If I have the MIDI Input/Output ports set to "OSCulator In/Out" I get something that looks like this:
Screenshot 2024-08-10 at 12.09.23?AM.png ?
If I have the MIDI Input/Output ports set to the native virtual ports created by Open Stage Control, I get this:
? Screenshot 2024-08-10 at 12.09.53?AM.png
I then set the "Event Type" on one of the lines (I've tried all of them) to "Key Combo" and create and set a key command for the "Value" field. Occasionally (usually upon first setup), one of the messages will cause the indicator lights to flash green, and the key command will be carried out. After that, though, further messages only cause some of the indicators to light up yellow, and the key command is not executed.
Unsure of how to diagnose this problem further, so any help is appreciated. Thanks!
I'm trying to use Open Stage Control to send either OSC or MIDI messages to OSCulator in order to trigger some keystrokes. While Open Stage Control is quite confusing, I've managed to configure things such that messages are being received by OSCulator. The problem is that I'm unable to reliably get OSCulator to trigger the key commands once the messages are received.
If I have the MIDI Input/Output ports set to "OSCulator In/Out" I get something that looks like this:
Screenshot 2024-08-10 at 12.09.23?AM.png ?
If I have the MIDI Input/Output ports set to the native virtual ports created by Open Stage Control, I get this:
? Screenshot 2024-08-10 at 12.09.53?AM.png
I then set the "Event Type" on one of the lines (I've tried all of them) to "Key Combo" and create and set a key command for the "Value" field. Occasionally (usually upon first setup), one of the messages will cause the indicator lights to flash green, and the key command will be carried out. After that, though, further messages only cause some of the indicators to light up yellow, and the key command is not executed.
Unsure of how to diagnose this problem further, so any help is appreciated. Thanks!