Announcement

Collapse
No announcement yet.

Quick & dirty multitouch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick & dirty multitouch

    I just followed the instructions at http://sethsandler.com/multitouch/mtmini/ and in no time built an extremely kludgy multitouch controller surface using a cardboard box, a picture frame, a piece of printer paper, lots of duct tape and a USB webcam (I used a cheap Xbox Live Vision video camera that I had on hand).

    It didn't take too long to configure the free and open-source Community Core Vision software available through http://ccv.nuigroup.com/#downloads to track my fingers as they touched the surface, and the TUIO messages showed up fine in Osculator once I set the OSC input port to 3333. As a proof of concept, I had Osculator send MIDI notes for each finger being tracked.

    At the moment, I don't have a real use for this, but perhaps someone else might find it useful or entertaining.

  • #2
    Nice, thanks for sharing Yasha!

    Comment

    Working...
    X