Hello, i'm in an entire remake of my live setup, and the wii motes are giving me a hard time for some reason.
In the past, they would be set to motion plus cyclic mode, and no matter where i had it in space, it would always increase/decrease the value assigned on a relative basis, happy days.
Now however, if i go to far in cyclic mode, it jumps back to the 0 value, if i go to far in infinite mode, it stops giving values, and if i go to far in continuous mode it just goes up and down like a sine wave.
It behaves like an absolute fader, even though nothing is set to be absolute.
For some purposes, going a few wheel-type motions is essential, as it might take me 3-4 laps in order to get the result i want (it's a visually enjoyable thing, and the value is increased in a smooth fashion)
Now however, i cant do more than a 90° motion towards either angle, or it will mess up.
I tried all the three pitches and rolls i could find, for each wii mote. But none would give me the behavior of the past, also i double checked my old mappings as well as my old oscluator file, everything is in order.
Here's a video if it's unclear.
And while i'm here, i see now that you can sync using the red button inside the mote, is there any difference at all compared to pressing 1-2 simultaneously? Oh, and that red button sync is a little buggy, i have to press both motes at the exact same time for them to connect, if one is pressed later on it...
1) does not connect
2) connects but dissconnects the other
I can't find the option for keeping discover mode on, everytime it finds a mote, it stops looking for new ones!
Cheers, and if you need a video for my problem, i'll be more than happy to make one, i must agree it's not super clear what i want.
In the past, they would be set to motion plus cyclic mode, and no matter where i had it in space, it would always increase/decrease the value assigned on a relative basis, happy days.
Now however, if i go to far in cyclic mode, it jumps back to the 0 value, if i go to far in infinite mode, it stops giving values, and if i go to far in continuous mode it just goes up and down like a sine wave.
It behaves like an absolute fader, even though nothing is set to be absolute.
For some purposes, going a few wheel-type motions is essential, as it might take me 3-4 laps in order to get the result i want (it's a visually enjoyable thing, and the value is increased in a smooth fashion)
Now however, i cant do more than a 90° motion towards either angle, or it will mess up.
I tried all the three pitches and rolls i could find, for each wii mote. But none would give me the behavior of the past, also i double checked my old mappings as well as my old oscluator file, everything is in order.
Here's a video if it's unclear.
And while i'm here, i see now that you can sync using the red button inside the mote, is there any difference at all compared to pressing 1-2 simultaneously? Oh, and that red button sync is a little buggy, i have to press both motes at the exact same time for them to connect, if one is pressed later on it...
1) does not connect
2) connects but dissconnects the other
I can't find the option for keeping discover mode on, everytime it finds a mote, it stops looking for new ones!
Cheers, and if you need a video for my problem, i'll be more than happy to make one, i must agree it's not super clear what i want.
Comment